Filter
Top Products
39
En
06
Chapter 6
Adjusting audio and video
Adjusting the video
The quality of the playback picture can be adjusted
according to the TV you are using.
1 During playback, press VIDEO ADJUST to display
the Video Adjust screen.
The Video Adjust screen can also be displayed by
selecting Video Adjust from the TOOLS menu.
2 Select a preset.
Select using / according to the TV being used.
• Pioneer PDP – Select this when connected to a
Pioneer plasma TV.
• Pioneer LCD – Select this when connected to a
Pioneer liquid crystal display TV.
• Pioneer Projector – Select this when connected to a
Pioneer front projector.
• PDP – Select this when connected to a plasma TV of
another brand.
• LCD – Select this when connected to a liquid crystal
display of another brand.
• Projector – Select this when connected to a front
projector of another brand.
• Professional – With this setting, video signal
processi
ng is restrai
ned. Select this when connected
to a professional monitor.
• Memory1 to 3 – Picture quality settings with
adjusted parameters can be stored in the memory.
For a description of the parameters, see When
Memory1, 2 or 3 is selected below.
When Memory1, 2 or 3 is selected
1 Select Adjustments.
Use to select Adjustments, then press ENTER.
A detailed settings screen appears.
2 Select the item to be adjusted.
Use / to select.
3 Adjust the picture quality.
When / are pressed, the adjustments can be made
viewing the picture. The detailed settings screen
reappears when ENTER is pressed.
• Prog.Motion – Adjust according to the type of image
(moving or still image). This is effective mainly when
outputting video materials as progressive images.
• Pure Cinema – This setting optimizes the operation of
the progressive scanning circuit for playing film
materials. Normally set it to Auto1. If the picture
seems unnatura
l, switch this to Auto 2, On or
Off
(page 40).
• YNR – Reduces noise in the luminance (Y) signal.
• CNR – Reduces noise in the chroma (C) signal.
• BNR – Reduces the block noise (block-shaped
distortion generated upon MPEG compression).
• MNR – Reduces the mosquito noise (distortion along
the contours of the picture generated upon MPEG
compression).
• Detail – Adjusts the picture’s contours.
• White Level – Adjusts the level of the white portions.
• Black Level – Adjusts the level of the black portions.
• Black Setup – Select the black level as the setup level.
Normally select 7.5 IRE. If the black level is too bright
due to the combination with the connected TV, select
0 IRE.
• Gamma Correction – Adjusts how the dark portions
of the pic
ture look
.
• Hue – Adjusts the balance between green and red.
• Chroma Level – Adjusts the density of the colors.
Note
• Prog.Motion and Pure Cinema have the effect only
for pictures recorded in the interlaced scan format
(480i or 1080i signals).
TOP MENU
TOOLS
HOME
MENU
RETURN
PLAY
PREV
PAUSE
STOP
NEXT
RED
GREEN
YELLOWBLUE
VIDEO ADJUST
ENTER
Adjustments
Video Adjust
PDP
Prog. Motion
Pure Cinema
YNR
CNR
BNR
MNR
Detail
White Level
Video Adjust [ Memory1 ]
Motion
Still
Auto1
Off Max
Off Max
Off Max
Off Max
Soft Fine
Min Max
Motion Still
Prog. Motion
V6000_CUXJ_EN.book 39 ページ ２００９年６月５日 金曜日 午前１１時５７分