Filter
Top Products
49
En
07
• If you want to enter two characters in succession that
are both on the same button (for example a P and an
R), press after inputting the first character then
input the second character.
•Use CLEAR to delete the last character.
•Use / to move the displayed characters when all
the input characters cannot be displayed.
5 Input Port Number.
Press , use the number buttons (0 to 9) to input the
number.
6 Press ENTER to set.
Displaying the network settings
Select and set Network Display Network
Configuration Next Screen.
Use / to select, then press ENTER.
The MAC address, IP address, subnet mask, default
gateway and DNS server (primary and secondary)
settings are displayed.
When Auto Set IP Address is set to On, the values
obtained automatically are displayed.
Note
• “0.0.0.0” is displayed when each IP address has not
been set.
Testing the network connection
Select and set Network Connection Test
Start.
Use / to select, then press ENTER.
“Network connection test completed successfully.” is
displayed once the test is completed. If any other
message is displayed, check the connections and/or
settings (pages 22 and 48).
Changing to other language at
language setting
1 Select and set Language.
Use / to select, then press ENTER.
2 Select and set Audio Language, Subtitle
Language or BDMV/DVD-Video Menu Lang.
Use / to select, then press ENTER.
3 Select and set Other.
Use / to select, then press ENTER.
4 Change the language.
Use / to change, then press ENTER.
• The language can also be changed using the number
buttons. Use / to move the cursor to Number,
use the number buttons (0 to 9) to input the number,
then press ENTER. Refer to Language Code Table and
Country/Area Code Table on page 54.
Note
• If a language not recorded on the BD/DVD is set, one
of the recorded languages is automatically selected
and played.
Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has been added to
BDs (data downloaded with the BD-LIVE function and
data used with the BONUSVIEW function) and
application data.
Caution
•Some time is required to erase the data.
• Do not unplug the power cord while data is being
erased.
•This operation does not work when a disc is loaded.
1 Select and set Data Management.
Use / to select, then press ENTER.
2 Select and set the erase menu.
Use / to select, then press ENTER.
• Individual/Shared Data Erase
Use this procedure to select and erase data
downloaded with the BD-LIVE function and data used
with the BONUSVIEW function (page 9).
Select Next Screen, then press ENTER. The list
screen appears.
Key Characters Key Characters
1
1 . –
6
m n o 6
2
a b c 2
7
p q r s 7
3
d e f 3
8
t u v 8
4
g h i 4
9
w x y z 9
5
j k l 5
0
0
Number
Audio Language
Initial Setup
BD PLAYER
Language
Video Out
Audio Out
Speakers
HDMI
Network
Language
Data Management
Setup Navigator
English
0514
Individual/Shared Data Erase
BD PLAYER
15 items
Shared Data
Disc Name 1
Disc Name 2
Disc Name 3
Disc Name 4
Disc Name 5
Disc Name 6
Disc Name 7
V6000_CUXJ_EN.book 49 ページ ２００９年６月５日 金曜日 午前１１時５７分