Filter
Top Products
Chapter 3 IBM DOS / WINDOWS Driver Installation1
3-6 Software Driver Installation Guide / Owner’s Manual
To accept the QUICK INSTALL Parameters press the [ENTER] key from
anywhere in the menu, or click on <ENTER>-Accept in the lower right corner
of the menu. Then, the following screen will pop-up:
If you are not satisfied with the options you chose, select NO. Then press the
[Esc] key to go back one menu at a time. If you are satisfied with the options,
select YES to start the installation. To abandon the installation, select EXIT, at
the main menu.
After you select YES, the installation process will begin. While the program is
installing the necessary files, a screen with “PLEASE WAIT” will blink.
Once the installation is complete, the following Dialog Box will appear:
Figure 9 - DOS/WINDOWS Installer: Installation Complete
To exit the installation program, follow these steps:
1: Press the [ESC] key twice to return to the main menu.
2: Press the Down arrow key to move to the EXIT menu
Installation Completed Successfully!
For the changes to take effect you must
EXIT the Install Program and reboot
your machine using CTL+ALT+DEL.
Install Parameters
P
ioneer CD-ROM Installer Ver 2.0