Filter
Top Products
Chapter 3 IBM DOS / WINDOWS Driver Installation
3-8 Software Driver Installation Guide / Owner’s Manual
Using Your Pioneer CD-ROM Changer
You are now ready to use the Pioneer CD-ROM Changer connected to your
computer system.
For use under DOS follow the instructions shown on the left side of the chart. For
use under WINDOWS, follow the instructions on the right:
DOS
WINDOWS
Place the CD-ROM discs in the magazine trays label side down.
Turn on the Pioneer CD-ROM Changer, insert the magazine into the magazine slot.
Restart your computer.
To access CD-ROM Discs from
DOS
At the DOS Prompt, type the drive
letter you wish to access as shown in
the following example:
Example: C:>E: (Then, press [Enter].)
Type: DIR (Then, press [Enter].)
To access CD-ROM Discs from
WINDOWS
Double Click on the File Manager
in the Main Program group.
CD-ROM icons will appear at the top of
the File Manager Window, next to the
original driver letters. Double Click on
the icon to access the disc.
Figure 11 - DOS/WINDOWS - Using the Pioneer CD-ROM Changer