Filter
Top Products
43
09Advanced Setup Menu
If “TOP MENU” is selected in step 4
Press ENTER again to set the Power On Start
mode. This option displays the top menu when
the power is turned ON.
• If the loaded disc does not have a top menu,
the disc enters the Stop mode.
• If the (cursor left) button is pressed
before ENTER is pressed, the selection is
canceled.
• When RETURN is pressed, the option is set
and the display returns to the POWER ON
START screen in the ADV. SETUP menu.
If “TITLE” is selected in step 4
When “TITLE” flashes, use the / (cursor up/
down) buttons or number buttons to input the
desired title number.
When either ENTER or is pressed, the
“CHAPTER” flashes. Use the / (cursor up/
down) buttons or number buttons to input the
chapter number.
Press ENTER again to confirm playback of a
title or chapter when power is turned on.
.
• If the (cursor left) button is pressed before
ENTER is pressed, the menu returns to the
TITLE option screen.
• When RETURN is pressed, the option is set
and the display returns to the POWER ON
START screen in the ADV. SETUP menu.
.
If “BARCODE/COMMAND STACK” is
selected in step 4
When “GROUP” flashes, use the / (cursor
up/down) buttons or number buttons to input the
group number.
Press ENTER to perform the series of commands
in the barcode when the power is turned on.
• If the (cursor left) button is pressed before
ENTER is pressed, the menu returns to the
BARCODE/COMMAND setting screen.
• When RETURN is pressed, the option is set
and the display returns to the POWER ON
START screen in the ADV. SETUP menu.
.