Filter
Top Products
57
10Barcode Stack / Command Stack
Retain (Prserve) Barcode Stack/
Command Stack settings
1 Press HOME MENU or RETURN with the
group or command selected.
2 Use the / (cursor left/right) buttons
to select “OK” then press ENTER.
Group
001
Group
002
001
SUBTITLE
01
AUDIO
2
ANGLE
3
002 03:123000-129000
003
GO TO GROUP
-02
004
005
006
007
008
Command Stack
Group
(1-002)
Command
(1-003)
Move Select ENTER Exit
HOME MENU
OK CANCEL RETURN
Save changes ?
• Settings are not saved if ENTER is pressed
when “CANCEL” is highlighted.
Erase Barcode Stack/Command
Stack Settings
1 Use the / (cursor up/down) buttons
to select the step to be erased.
Group
001 001
PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-003)
Move Select ENTER CLEARDelete Exit
HOME MENU
2 Press CLEAR.
Group
001 001 03:123000-129000
002 05:03-07 03 2 1
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-002)
Move Select ENTER CLEARDelete Exit
HOME MENU
• The selected step is erased and the following
steps increment up.
3 Save the change.
• During the save step after an erase
operation, the step will not be erased if
ENTER is pressed on “CANCEL.” The
erasure is confirmed and recorded only
when ENTER is pressed on “OK.”
Modify Barcode Stack/Command
Stack Settings
Example: To change audio setting
from 2 to 1 on step 003
1 Use the / (cursor up/down) buttons
to select step 003
then press ENTER.
Group
001 001
PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-003)
Move Select ENTER CLEARDelete Exit
HOME MENU
2 Use the / (cursor up/down) buttons
to select “STACK CORRECTING
” then press
ENTER.
•“STACK CORRECTING”
appears only after
a step has been entered.
Group
001 001
PLAY
002 03:123000-129000
003 05:03-07 03 2 1
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(1-003)
Move Select ENTER Exit
HOME MENU
RETURN
Return
SEGMENT PLAY
CHAPTER PLAY
COMMAND
STACK CORRECTING