Filter
Top Products
15
8 SUBTITLE button
Press repeatedly to select one of the subtitle
languages programmed on a DVD or to turn the
subtitles off (page 37).
9 3 (play) button
Press to start disc playback (pages 22 and 25).
0 STEP/SLOW e/E buttons
Press STEP/SLOW E during playback to view
slow playback. In pause mode, press STEP/SLOW
E to advance DVDs and Super VCDs/Video CDs
frame by frame and STEP/SLOW e to back up a
few frames at a time. Reverse STEP/SLOW is not
possible with a Super VCD/Video CD (page 43).
- 8 (pause) button
Press to pause playback of a disc. Press again to
resume playback (page 43).
= Number buttons (1-9, 0, +10)*
Use to perform direct title and chapter/track
searches, and to input numerical values (pages 23
and 44).
~ REPEAT button
Press to repeat playback (page 46).
! VNR button
Press to turn on the video noise reduction function
(page 23).
@ PLAYBACK CONTROL button
Use to switch the playback control for the Super
VCD/Video CD on or off. (page 23)
# CONDITION MEMORY button
You can store in memory the settings for up to 15
DVDs. Press CONDITION MEMORY during DVD
playback to memorize the settings (page 50).
$ OPEN/CLOSE button
Press to open or close the disc tray (pages 22 and
25).
% DISPLAY button
Press during playback to display statistical disc
information. Press repeatedly to display different
information (page 51).
^ SETUP button*
Press when the player is in either play or stop mode
to open and close the Setup screen (page 26).
& MENU button*
Use to display or close the DVD menu screen
(page 23).
* TOP MENU button*
Press to call up the top menu programmed on the
DVD. Depending on the DVD, the top menu may be
identical to the DVD menu (page 23).
( ANGLE button
Some DVDs are recorded with various camera angle
playback options. Press ANGLE repeatedly to
display different camera angles (page 45).
) RETURN button*
Use to go one menu back (current settings are
maintained). Use RETURN when you do not want
to change the option setting in a menu (pages 23,
27, and 48).
_ 1 (fast reverse)/¡ (fast forward) buttons
During playback of DVD, Super VCD and Video CD,
press ¡ to perform fast forward scanning. Press
1 to perform fast reverse scanning of DVD, Super
VCD and Video CD. When a CD is loaded, audio
scanning is performed (page 24).
+ 7 (stop) button
Press to stop playback. In Normal mode, pressing
once enables playback to resume from a point
shortly before the location where it was stopped.
Pressing twice causes the disc to return to the
beginning of the disc when playback starts again.
Resume play is possible only in Normal mode
(page 25).
¡ SEARCH MODE button
Press to perform a title, chapter/track or time search
(page 44).
™ CLEAR button
Works in conjunction with a number of player
functions. Use to cancel repeat (page 46).
£ A-B button
Press at the beginning and end of the section you
want to repeat or to mark a location you want to
return to (page 46).
¢ PROGRAM button
You can use this button to program up to
24 subsequent tracks while you are singing.
(page 33)
∞ KEY CONTROL buttons
Use to adjust the levels of the key in 11 steps.
(pages 32 and 36)
NAMES AND FUNCTIONS