Pioneer DVR-450H-S DVD Recorder User Manual


 
The Initial Setup menu
115
En
14
Colour RGB (0–255) Use if colours are weak and black appears to ‘float’
on the RGB (16–235) setting.
RGB (16–235) Use this setting if colours appear overly rich and the
black too deep on the RGB (0–255) setting.
YCbCr 4:2:2 The video signal is output as a 10-bit YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.
YCbCr 4:4:4 The video signal is output as a 8-bit YCbCr 4:4:4
component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
• You cannot choose YCbCr 4:2:2 when the Screen Resolution is set to 720 x 576i (720 x 480i).
Audio Output Auto •
Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the
Audio
Out
setting, number of audio channels, and the HDMI-
connected device, Linear PCM audio may be output.
PCM All audio signals are converted to Linear PCM
(except DTS).
Bitstream Priority Select if the connected device is compatible with
bitstream audio.
This setting is not available when a DVI device is connected.
HDMI Control On • Enable the HDMI Control function. Select this option
when connected to an HDMI Control-compatible
Pioneer plasma display, AV system (amplifier or AV
receiver etc.).
Off Disable the HDMI Control function. Select this option
when not connected to an HDMI Control-compatible
component, or when connected to a component
manufactured by a company other than Pioneer.
• For more information about HDMI Control, see HDMI Control on page 22.
• This setting is available even if you are not connected to an HDMI device.
• For more information see Troubleshooting on page 126.
Options
On Screen Display On • The recorder displays operation displays (Stop, Play,
etc.) on-screen.
Off Switches off the on-screen operation displays.
Front Panel Display On • The time is shown in the front panel display when the
recorder is in standby.
Off The front panel display is switched off in standby.
Setting Options Explanation
14 Initial_Settings.fm 115 ページ 2007年3月27日 火曜日 午前10時2分