Filter
Top Products
Recording
05
46
En
5 Select ‘Store Programme’.
6 Press to exit the Timer Recording
screen.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCKED
. If any buttons are pressed on the
remote or front panel,
LOCKED
is briefly
displayed again.
• To unlock the recorder, press and hold
(Stop) on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCKED
.
• Even if you make Child Lock settings,
this unit can still be controlled by the
remote of a connected plasma
television. If you do not want this unit to
be able to be controlled by another
component when you have set a Child
Lock, turn this unit’s
HDMI Control
to
OFF
(page 115).
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see
Lock Disc
on
page 100), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer
programme! Why not?
You can’t enter a timer programme if the
clock isn’t set.
• What happens when two or more timer
programmes overlap?
Basically, the programme with the earlier
recording start time has priority.
However, the recorder will start recording
the programme with the later start time
after the earlier programme is finished. If
schedule to record two programmes
have the same times (but different
channels, for example), then only one of
the two programmes will be recorded. In
this event you should cancel the
scheduled recording of the lesser
important programme. If one of the
overlapping programmes is a regular
timer programme, you may choose
‘Cancel Once’
in order to avoid having it
overlap with a separately scheduled
programme
(see
Skipping a regular timer
programme
on page 45
)
.
ENTER
HOME
MENU
STOP RE
C
ENTER
STANDBY/ON
DVR650HS_TLT_EN.book 46 ページ ２００７年３月２０日 火曜日 午後１２時１９分