Pioneer DVR-510H DVD Recorder User Manual


 
Getting started
04
32
En
2 Elapsed chapter time
3 Total running time of chapter
4 Data transfer rate
Shows the current data rate being read from the disc.
5 Copy protected material (!) / PureCinema
indicator (#)
Shows ‘
!
’ if the playback material is copy-once protected.
Shows ‘
#
’ if the current video is 24 fps, progressive scan.
Recording display
1 Current title number
2 Elapsed recording time
3 Timer recording start and stop times
Shows the start and stop times if the current recording is
a timer recording.
4 Remaining recording time available
Shows the amount of space left on the disc in the current
recording mode.
5 Recording mode
Shows the current recording mode (
FINE
,
SP
,
LP
, etc.),
and the total recording time of the disc.
6 Broadcast program title
Note
When using the simultaneous play and record
feature, the display shows information for playback
only.
During real-time copy, the copy source playback
information is displayed.
If
Frame Search
is
On
(see
Frame Search
on page 98),
the frame number is shown next to the elapsed time
display when the disc is paused.
Transfer rate shows the amount of video and audio
information recorded on the disc. It is not an
indication of picture/audio quality.
The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
Copy Once
or
Can’t Record
messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
ì Rec
DVD-R Video
FINE (1h00m/DVD) Rem. 0h35m
9:00 PM – 10:00 PM
30. 00. 15
EVENING NEWS
Copy Once
Stereo
WNBC
65
1 2 3 4
DVR-03_HDD_KU.book 32 ページ 2003年8月7日 木曜日 午前10時40分