Pioneer DVR-510H DVD Recorder User Manual


 
Recording
06
49
En
Timer recording using the VCR Plus+
®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode numbers with
their program details. If you want to make a timer
recording of a program, you just input the corresponding
code. The date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it’s a once-only recording
or a regular recording.
1 Press ‘VCR Plus+’ to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU
, select
Timer Recording
, then
VCR
Plus+
).
Use the number buttons to enter the PlusCode
number. (To clear the last digit entered, press
CLEAR
.)
Press
REC MODE
to change the recording quality
(see also
Setting the picture quality/recording time
on
page 44). If Manual Recording is on, then you can
also select the
MN
setting.
Use the
/
(cursor left/right) buttons to select the
Once
,
Daily
or
Weekly
recording option.
Press
HDD
to record to the hard disk drive, or
DVD
to
record to a DVD.
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
Tip
You can check the timer program settings by
pressing
TIMER REC
to display the timer recording
screen.
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.
Important
You can’t use this feature until you have set up the
guide channels. See
VCR Plus+ CH Setting
on
page 91
You can’t change the recording mode.
You can’t program daily or weekly timer recordings.
HOME
MENU
HDD DVD
VCR Plus+
ENTER
CLEAR
REC MODE
ì
to input
3 9 9 2 4
09
PlusCode#
Rec Mode
Rec Times
VCR Plus+
MN21
Once Daily
Weekly
REC MODE
to change
to change level
to change
Rec to
HDD
HDD DVD
to change
ENTER
CLEAR
VCR Plus+
DVR-03_HDD_KU.book 49 ページ 2003年8月7日 木曜日 午前10時40分