Pioneer DVR-510H DVD Recorder User Manual


 
The Initial Setup menu
13
92
En
Video Out settings
Component Video Out
Default setting:
Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
If your TV is compatible with progressive-scan
component video, set this
Progressive
for the highest
quality picture. If your TV is not compatible with
progressive-scan video, leave it set to
Interlace
.
See also
Progressive scan video
in the glossary on
page 112.
Important
If you switch to
Progressive
when using a TV that is
not compatible with progressive-scan video, you will
not be able to see anything displayed on your TV. If
this happens, press and hold
PAUSE
on the front
panel, then press
HDD/DVD
. This will set the
recorder’s video output back to
Interlace
.
Audio In settings
External Audio
Default setting:
Stereo
If the external source is standard stereo, leave set to
Stereo
. If each channel carries a separate soundtrack,
change to
Dual Mono
.
When the external audio is from the DV input, an audio
subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono. This has
priority over the setting you make here.
Dual Mono Recording
Default setting:
L
When recording a dual mono source from an external
input in Video mode or VR mode set to
FINE
/
MN 32
, you
can choose to record either the
L
(left), or the
R
(right)
audio channel.
Note
If you’re recording in VR mode (except when set to
FINE
/
MN 32
), both channels will be recorded and
you can switch them as you like on playback.
Compatibility of this unit with progressive-scan TVs
Consumers should note that not all high-definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output (
Interlace
). If there
are questions regarding our TV set compatibility with this model,
please contact our customer service center.
This recorder is compatible with the following Pioneer displays
and monitors
Plasma display
• PDP-502MX, PDP-505HD, PDP-5030HD, PDP-4330HD,
Pro-1000HD, Pro-800HD, PDP-5031, PDP-4300
Projection monitor receiver
• SD-532HD5, SD-533HD5, Pro-700HD, Pro-710HD, Pro-610HD,
Pro-510HD, Pro-720HD, Pro-620HD, Pro-520HD, Pro-730HD,
Pro-630HD, Pro-530HD, SD-582HDS, SD-641HDS, SD-643HDS
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Component Video Out
Interlace
Progressive
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
Stereo
Dual Mono
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
L
R
Initial Setup
DVR-03_HDD_KU.book 92 ページ 2003年8月7日 木曜日 午前10時40分