Pioneer DVR-640H-S DVR User Manual


 
Copying and backup
08
89
En
You can use a DVD-R ver. 2.0 or 2.1 disc, or
DVD-RW ver. 1.1 or ver. 1.2 disc for the
backup.
If you backup a DVD-R disc to DVD-RW,
you cannot undo the finalization later.
Actual recordable capacity of discs vary
so there may be cases where the
contents of the disc you’re backing-up
will not fit on to a particular blank disc. If
this happens, please try another brand of
disc.
DVD-R/-RW discs can only be backed up
to DVD-R/-RW discs; DVD+R/+RW
discs can only be backed up to DVD+R/
+RW discs.
6 Select ‘Start’ to start writing the
backed-up data to the blank disc.
To see the progress of the backup, press
DISPLAY
.
You can cancel the backup process by
pressing
ONE TOUCH COPY
for more
than one second. However, this will
make the disc unusable (although if you
are using a DVD-RW or DVD+RW disc
you can re-initialize it in order to make it
usable again—see
Initializing recordable
DVD discs
on page 51.)
7 After the recorder has finished
recording the backup disc, you can select
whether to make another backup of the
same data or exit.
Select
Start
to make another backup
copy or
Cancel
to finish. If you want to
make another backup copy, return to
step
6
above.
8 If you don’t need to keep the backup
data on the HDD, you can delete it now.
Select
Yes
to delete the data from the HDD;
select
No
to keep it (you can delete it later if
you want to).
If you decide to leave the backup data on
the HDD, you can make backup copies
to recordable DVD discs anytime from
the Disc backup menu.
Write back-up data from Hard Disk Drive.
The disc contents will be overwritten.
OK to start?
Start
Cancel
Disc Back-up
Disc back-up finished.
To make another back-up copy, please load
a recordable disc.
Start
Cancel
Disc Back-up
The backed-up data is still on the HDD.
Erasing it will increase the free space
available. OK to Erase?
Yes
No
Disc Back-up
DVR640H_KU_EN.book 89 ページ 2006年3月7日 火曜日 午後3時18分