Pioneer DVR-640H-S DVD Recorder User Manual


 
The Initial Setup menu
14
110
En
Chapter 14
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
The clock must be set in order to use timer recording.
HELP Setting On •
Switches on the automatic Help screens for GUI dis-
plays.
Off
Switches off the automatic Help screens for GUI dis-
plays. (Press
HELP
on the remote to manually display
the Help screen.)
Setup Navigator Start
Select to start the Setup Navigator. See also
Switch-
ing on and setting up
on page 30
.
Tuner
Auto Channel
Setting
Antenna •
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.
Cable
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
DVR640H_KU_EN.book 110 ページ 2006年3月7日 火曜日 午後3時18分