Filter
Top Products
Additional information
15
128
En
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
Explanation/Action
• Initializing disc. Please wait a
moment.
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
• Incompatible region number.
The disc loaded has an incompatible region
number for the recorder and so will not play.
• Cannot record any more titles.
• No more space for file management
data.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
• This disc cannot be recorded. Undo
the finalization.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc.
The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please consult a Pioneer Service Center.
• Incompatible or unreadable disc.
The disc loaded is a playback-only disc type. This
display may also appear if the disc is dirty or
damaged.
• Cannot record to a disc that is not
CPRM compatible.
• Cannot record this content using
Video mode recording.
• This video cannot be recorded to
DVD+R/+RW.
The video source is copy-once protected. Use a VR
mode DVD-R/-RW disc with CPRM for recording.
DVR640H_KU_EN.book 128 ページ ２００６年３月７日 火曜日 午後３時１８分