Filter
Top Products
10
<DRC1101>
En
The DVD-R writing system consists of a personal computer
(PC) and the DVD-R Drive.
In order to operate the DVD-R Drive, the accompanying
application software and disc driver must be installed on the
computer. (If the computer cannot accommodate the
accompanying application software and device driver, find
alternate software or drivers.)
OPERATION
7 Starting Up the DVD-R System
1. Turn ON the power to the DVD-R Drive.
2. Turn ON the power to the PC.
3. Press the OPEN/CLOSE button to open the tray.
4. Place the disc in the tray with its label side facing up.
5. Press the OPEN/CLOSE button to close the tray.
6. Start up and run the application program.
7 Shutting Down the DVD-R System
1. Terminate the application program.
2. Press the OPEN/CLOSE button to open the tray.
3. Remove the disc.
4. Press the OPEN/CLOSE button to close the tray.
5. Turn OFF the power to the PC.
6. Turn OFF the power to the DVD-R Drive.
÷ Refer to the application software manual concerning
installation and disc writing/reading operations.