Filter
Top Products
12
=
Stereo = 1/L (Left) = 2/R (Right)
(Buttons indicated with * are used for menu operation.)
1 LAST MEMORY button
You can resume DVD playback from the point you
last watched even if the disc is removed from the
player. You can resume Video CD playback in the
same way only if it remains in the play position.
Press LAST MEMORY during playback to set a Last
Memory point. When you want to resume playback
of that disc, press LAST MEMORY in the stop mode
and playback starts from the memorized point. Last
Memory locations can be stored for up to 5 DVDs
and 1 Video CD (page 52).
2 (standby/on) button
Press to switch the player on or to put in standby
(pages 21, 25).
3 AUDIO button
Press repeatedly to select one of the audio
languages programmed on a DVD (page 36).
For Video CD and CD, each press changes the audio
output as follows.
4 SUBTITLE button
Press repeatedly to select one of the subtitle
languages programmed on a DVD or to turn the
subtitles off (page 39).
5 SETUP button*
Press when the player is in either play or stop mode
to open and close the Setup screen (page 18, 26).
6 MENU button*
Use to display or close the DVD menu screen (page
23).
7 VNR button
Switches VNR on/off, or ajusts the video quality.
If the video output is set to progressive scan, press
to ajust the video quality. Otherwise, press to switch
VNR on/off (pages 31 to 33).
8 Cursor buttons (2/3/5/∞)*
Use to move through the options on menu screens
and to change settings.
9 PREV 4 button (previous)
During playback, press PREV 4 to go back to a
previous chapter/track (pages 23, 24).
0 STOP 7 button
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it was stopped. Pressing twice
causes the disc to return to the beginning of the disc
when playback starts again (page 25).
- STEP/SLOW e/E buttons
Press STEP/SLOW E during playback to view
slow playback. In pause mode, press STEP/SLOW
E to advance DVDs and Video CDs frame by frame
and STEP/SLOW e to back up a few frames at a
time (page 46).
= Number buttons (1-9, 0, +10)*
Use to perform direct title and chapter/track
searches, and to input numerical values.
~ PROGRAM button
You can program titles, chapters, or tracks to play
back in a desired order. Programs can be a
maximum of 24 steps.(pages 50, 51).
! REPEAT button
During playback of a DVD, press once to repeat
playback of the current chapter, and twice to repeat
playback of the current title. During playback of a
Video CD or CD, press once to repeat playback of
the current track, twice to repeat playback of the
current disc, and 3 times to repeat all the discs
loaded in the player (page 48).
@ DISC buttons (1-5)
Use to select discs in the player directly (page 21).
Remote Control
The remote control buttons are luminous.
A
-
B
DISC
0
TOP MENU
MENU
STOP
STEP/SLOW
ENTER
5
5
5
5
4
¢
1
87
e
E
¡
3
REV FWD
PREV
NEXT