Filter
Top Products
Listening to your system
03
25
En
English
Chapter 3
Listening to your system
Important
• To access green functions on the remote, move the
slider switch from MAIN to SUB.
Auto listening mode
The Auto listening mode is the simplest way to listen to
any source as it was mastered: the output from the
speakers mirrors the channels in the source material.
RCS-404H/RCS-505H only: If you set up the system for
Front surround (page 7), the Front Surround modes will
give the best results (see Using Front Surround on
page 26).
• Press SURROUND to select the AUTO listening
mode.
If the source is Dolby Digital or DTS, the front panel 2 D
or DTS indicator lights.
• You can also use the SURROUND button on the
display unit to change the listening mode.
Listening in surround sound
You can listen to stereo or multichannel sources in
surround sound. Surround sound is generated from
stereo sources using one of the Dolby Pro Logic
decoding modes.
RCS-404H/RCS-505H only: If you set up the system for
Front surround (page 7), the Front Surround modes will
give the best results (see Using Front Surround on
page 26).
• Press SURROUND repeatedly to select a listening
mode.
• You can also use the SURROUND button on the
display unit to change the listening mode.
The choices that appear in the display will vary according
to the type of source that’s playing.
If the source is Dolby Digital or DTS, the front panel 2 D
or DTS indicator lights.
• AUTO – Auto listening mode (see above)
• DOLBY PL (Dolby Pro Logic) – 4.1 channel surround
sound for use with any two-channel source
• MOVIE (Dolby Pro Logic II Movie) – 5.1 channel
surround sound, especially suited to movie sources,
for use with any two-channel source
• MUSIC (Dolby Pro Logic II Music) – 5.1 channel
surround sound, especially suited to music sources,
for use with any two-channel source; see Dolby Pro
Logic II Music settings below
• STEREO – See Listening in stereo on page 26
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music mode (see
above), there are three settings you can adjust: Center
Width, Dimension, and Panorama.
1 With Dolby Pro Logic II Music mode active, press
SOUND.
2 Use / to select C WIDTH, DIMEN. or
PANORAMA then press ENTER.
• C WIDTH (Center Width): Provides a better blend of
the front speakers by spreading the center channel
between the front right and left speakers, making it
sound wider (higher settings) or narrower (lower
settings)
• DIMEN. (Dimension): Adjusts the depth of the
surround sound balance from front to back, making
the sound more distant (minus settings), or more
forward (positive settings)
MCACC
SURROUND
ADVANCED SOUND TV/DVD
SLEEP
INPUT
MAIN SUB
CHANNEL
TV CONTROL
RDS DISP
AXD7442
VOLUME DISPLAY
CLEAR
JUKE BOX
TEST
TONE VIDEO
IN
/TUNE
78
0
++
––
9
MCACC
SURROUND
ADVANCED SOUND TV/DVD
SLEEP
INPUT
MAIN SUB
CHANNEL
TV CONTROL
RDS DISP
AXD7442
VOLUME DISPLAY
CLEAR
JUKE BOX
TEST
TONE VIDEO
IN
/TUNE
78
0
++
––
9
SET UP
MCACC
ADVANCED SOUND TV/DVD
SLEEP CLEAR
JUKE BOX
TEST TONE VIDEO IN
SR+
ONE TOUCH COPY
MENU
/TUNE+
ENTER
/TUNE–
/ST– /ST+
123
456
78
0
++
9
INPUT
MAIN SUB
CHANNEL
TV CONTROL
RDS DISP
AXD7442
VOLUME DISPLAY
++
––