Filter
Top Products
Getting started
04
59
En
English
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Switch on the recorder.
When you switch on for the first time, your TV should
display the Setup Navigator screen (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 128).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
3 Choose a language (then press ENTER).
4 Start the Setup Navigator.
• If you don’t want to use the Setup Navigator, press
to select Cancel, then press ENTER to exit the Setup
Navigator.
5 Select the Auto Channel Setting (‘Auto
Scan’ or ‘Download from TV’), or ‘Do not set’.
• Select Do not set if you want to skip channel setup
(because they have already been set up, for example).
• You can only use the Download from TV feature if
this recorder is connected to your TV using a fully-
wired 21-pin SCART cable via the AV1(RGB)-TV
connector, and if your TV supports this function
(check your TV’s instruction manual for more
details).
• Select your country.
• Auto-tuning channels
The Auto Scan option automatically scans and sets the
channel presets.
• Downloading channels from your TV
Use the Download from TV option to download all the
channels that your TV is tuned to.
6 Select ‘Auto’ for automatic time setting,
or ‘Manual’ to set the clock manually.
RECORDER
ENTER
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
Power Save
Help
Setup Navigator
Setup Navigator
Language
Basic
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
ENTER
k
Setting
Line System
e
r Save
P
p
Navigator
p
Navigator
Auto Channel Setting
English
Download from TV
Do not Set
Auto Scan
ENTER
k
Setting
Line System
e
r Save
k
Setting
t
Line System
e
r Save
P
Country Selection
Country
Austria
Tuning
32/99
Cancel
Downloading Pr 5
32/99
Cancel
ENTER
k
Setting
Line System
e
r Save
P
Clock Setting
Auto
Manual
Auto