Filter
Top Products
15
En
English
Ejecting discs
Press [EJECT h]2.
The disc is ejected from the disc insertion slot.
! This button only functions when in the pause mode or when pausing
at a cue point.
Loading USB devices
Connect the USB device to the USB device insertion slot
4.
The [USB STOP] indicator lights.
Removing USB devices from this unit
! Be sure to follow the procedure below when removing USB devices
from this unit. Removing a USB device without following this proce-
dure could erase this unit’s management data and make it impos-
sible to read the USB device.
! When turning this unit’s power off, be sure to remove the USB device
first.
1 Press [USB STOP] 5 for at least 2 seconds.
The [USB STOP] indicator turns off.
2 Disconnect the USB device.
Basic Operations (player, source select and browse sections)
EJECT
REV
SOURCE
SELECT
TIME MODE
AUTO CUE
CD
CDJ
IN/CUE
OUT
VINYL
JOG MODE
CUE
1
USB
12
DISPLAY
F
UTILITY
FWD
SEARCH
MASTER TEMPO
TEMPO
0
TEMPO RANGE
PITCH BEND
BACK
MEMORY
CUE
SELECT PUSH
RELOOP
/EXIT
HOT LOOP OUT ADJUST
EJECT
REV
SOURCE
SELECT
TIME MODE
AUTO CUE
CD
CDJ
IN/CUE
OUT
VINYL
JOG MODE
CUE
1
USB
12
DISPLAY
FOLDER TRACK REMAIN
M
REPEAT
RELAY
SF
UTILITY
FWD
SEARCH
MASTER TEMPO
TEMPO
BPM
%
TEMPO
0
TEMPO RANGE
PITCH BEND
BACK
MEMORY
CUE
SELECT PUSH
RELOOP
/EXIT
HOT LOOP OUT ADJUST
WIDE
±16
±10
±6
A.CUE
MULTI ENTERTAINMENT PLAY ER MEP-4000
EJECT
DISC 1 DISC 2
EJECT
MULTI ENTERTAINMENT PLAY ER MEP-4000
OFF
ON
USB 1
USB STOP
POWER
USB 2
USB STOP
2 6 f hg
je
8
d
9
c
a
b
7
1
4
5
23
4 5
2 3
FOLDER TRACK REMAIN
M
REPEAT
RELAY
S
TEMPO
BPM
%
WIDE
±16
±10
±6
A.CUE
i
Source select section
Source select section
Browse section
Player section
Control unit
Drive unit
MT MT
About the power switch of this unit
To turn the power on
Press [POWER] 1.
Turn on the power of this unit.
The [POWER] indicator lights green.
To turn the power off
Press [POWER] 1.
Turn off the power of this unit.
The [POWER] indicator turns off.
Playback
1 Load the source onto this unit.
2 Press [SOURCE SELECT] 6 and set the source.
! This only functions when in the pause mode or when pausing at a
cue point.
3 Turn the rotary selector i.
Select the track.
! When there are multiple folder layers
— To move to lower layers in a folder, select the folder then press
the rotary selector.
— To return to higher layers, press [BACK] j.
— Press [BACK] for more than 1 second to move to the top layer.
4 Press the rotary selector i.
The track is loaded and playback begins.