Filter
Top Products
19
En
English
Deleting stored cue or loop points
individually
1 Connect the USB device to this unit.
! When using a single USB device, connect it to the USB1 port.
2 Press the rotary selector i for over 1 second.
[CUE CALL] is displayed.
! Press [BACK] j to return to the previous screen.
3 Turn the rotary selector i to display [CUE DELETE].
4 Press the rotary selector i.
[DELETE 01] is displayed.
! Press [BACK] j to return to the previous screen.
5 Turn the rotary selector i to display the number of
the point you want to delete.
6 Press the rotary selector i.
[DELETE XX?] is displayed.
! Press [BACK] j to return to the previous screen.
7 Press the rotary selector i.
The stored cue or loop point is deleted.
Changing the settings
O
URCE
E
LECT
TIME MODE
AUTO CUE
CDJ
IN/CUE
OUT
MT
VINYL
JOG MODE
CUE
DISPLAY
UTILITY
FWD
SEARCH
MASTER TEMPO
T
0
TEMPO RANGE
PITCH BEND
BACK
MEMORY
CUE
SELECT PUSH
RELOOP
/EXIT
HOT LOOP OUT ADJUST
FOLDER TRACK REMAIN
M
REPEAT
RELAY
SF
TEMPO
BPM
%
WIDE
±16
±10
±6
A.CUE
f g
h
j
i
Control unit
Browse section
1 Press [DISPLAY (UTILITY)] g for at least 3 seconds.
The [UTILITY] screen is displayed.
2 Use the rotary selector i to change the setting.
! Press [BACK] j to return to the previous screen.
3 Press the rotary selector i.
The changed settings are stored.
! To close the [UTILITY] screen, either press [DISPLAY (UTILITY)] g or
select [EXIT] from the setting items and press the rotary selector i.
Setting preferences
The setting items can be set separately for the respective players.
! Do not turn off this unit’s power while [Saving] is displayed on the
information display section.
Options
settings
Selection
items
Descriptions
A. CUE LEVEL
-36 dB, -42 dB,
-48 dB, -54 dB,
-60 dB*, -66 dB,
-72 dB, -78 dB
Sets the auto cue level. For details on
the setting procedure, see Changing the
auto cue level on page 16.
RELAY
ON/OFF*
Sets the relay play function. For details
on the setting procedure, see About the
relay function on page 19.
REPEAT
ON/OFF*
Sets the repeat play function. For details
on the setting procedure, see About the
repeat function on page 19.
SENSITIVITY
-20 – 0* – +20
Adjusts the sensitivity when the top of
the jog dial is pressed.
SLEEP TIME
No sleep, 5 – 15*
– 120 min
Sets the time until the sleep mode
is set.
SCROLL START
TIME
0.5 – 2.0* – 30.0 sec
Sets the time after which the characters
on the information display section start
scrolling.
SCROLL SPEED
50 – 400* –
2 000 msec
Sets the speed at which the characters
on the information display section
scroll.
BIT RATE
Display ON/OFF* Sets the bit rate display.
VERSION
— Displays this unit’s software version.
LOAD DEFAULT
— Resets the settings.
EXIT
—
The changed settings are saved and the
previous screen reappears.
*: Setting upon purchase
About the relay function
When the relay play function is turned on for one of the players, tracks
are played alternately on each of the players. Playback can be continued
endlessly until the relay play function is turned off by preparing the
source on one player while a track is playing on the other player.
The setting below must be made to enable the relay function.
— Set [AUTO CUE] to [ON].
About the repeat function
This function plays the currently playing track or the tracks in the current
folder repeatedly.
The setting below must be made in order to enable the repeat function.
— Set [RELAY] to [OFF].
! When there are multiple folder layers, the repeat play function differs
according to the [AUTO CUE] setting, as described below.
— When [AUTO CUE] is set to [ON]: The currently playing track is
played repeatedly.
— When [AUTO CUE] is set to [OFF]: The tracks in the currently
playing folder are played repeatedly.
About the sleep function
When the set sleep time is reached while a CD is in the pause mode
or paused at a cue point, operation of the CD stops and [SLEEP] is dis-
played on the information display section.
The sleep mode is canceled by pressing one of the following buttons:
— [PLAY/PAUSE f] button
— [CUE] button
! The time after which the sleep mode is set can be changed at
Changing the settings.