Filter
Top Products
17
En
English
3 Spin the jog dial b in the direction you want to play
and at the desired speed.
The sound is played according to the direction and speed at which the
jog dial is spun by spinning the top of the jog dial while pressing it.
4 Release your hand from the top of the jog dial b.
Normal playback resumes.
Pitch bend
During playback, spin the outer section without
touching the top of the jog dial b.
The playing speed increases when spun clockwise, decreases when
spun counterclockwise. When spinning is stopped, playback returns to
the normal speed.
! When the jog mode is set to the CDJ mode, the same operation can
be performed by spinning the top of the jog dial.
Frame search
Spin the jog dial b while in the pause mode.
The pause position can be moved in units of single frames.
! The position is moved in the direction of playback when the jog
dial is spun clockwise, in the reverse direction when it is spun
counterclockwise.
Super fast search
Spin the jog dial b while pressing [SEARCH m, n] 7.
The track is fast-forwarded/fast-reversed in the direction in which the jog
dial is spun.
! This function is canceled when [SEARCH m, n] is released.
! When you stop the jog dial from spinning, normal playback resumes.
! The fast-forward/fast-reverse speed can be adjusted according to the
speed at which the jog dial is spun.
Set the loop
EJECT
REV
SOURCE
SELECT
TIME MODE
AUTO CUE
CD
CDJ
IN/CUE
OUT
VINYL
JOG MODE
CUE
1
USB
12
DISPLAY
FOLDER TRACK REMAIN
M
REPEAT
RELAY
SF
UTILITY
FWD
SEARCH
BAC
K
MEMORY
CUE
SELECT PUSH
RELOOP
/EXIT
HOT LOOP OUT ADJUST
A.CUE
89a
b
7
edc
Player section
Control unit
1 During playback, press [LOOP IN/CUE (HOT LOOP)] c.
Loop In Point is set.
! This operation is not necessary if you have already set a Cue Point as
a Loop In Point.
2 Press [LOOP OUT (OUT ADJUST)] d.
The loop out point is set, and loop playback begins.
Fine-adjusting the loop out point (loop
out adjust)
1 During loop playback, press [LOOP OUT
(OUT ADJUST)] d.
[LOOP OUT (OUT ADJUST)] starts flashing quickly.
The loop out point’s time is displayed on the main unit display.
2 Press [SEARCH m, n] 7.
The loop out point can be adjusted in units of single frames.
! The same operation is possible using the jog dial.
! The loop out point adjustment range is anywhere after the loop in
point.
3 Press [LOOP OUT (OUT ADJUST)] d.
Loop playback resumes.
! Loop playback also resumes if no operation is performed for over 10
seconds.
Canceling Loop playback (Loop Exit)
Duriung loop playback, press [RELOOP/EXIT] e.
Playback continues beyond the Loop Out Point without returning to the
Loop In Point.
Returning to Loop playback (Reloop)
After canceling loop playback, press [RELOOP/EXIT] e
during playback.
The track returns to the previously set loop in point and loop playback
begins.
Returning to the loop in point (Hot Loop)
During loop playback, press [LOOP IN/CUE (HOT LOOP)] c.
The track instantaneously returns to the set loop in point and loop play-
back starts.
Displaying track information
(browse section)
O
URCE
E
LECT
TIME MODE
AUTO CUE
CDJ
IN/CUE
OUT
MT
VINYL
JOG MODE
CUE
DISPLAY
UTILITY
FWD
SEARCH
MASTER TEMPO
T
0
TEMPO RANGE
PITCH BEND
BACK
MEMORY
CUE
SELECT PUSH
RELOOP
/EXIT
HOT LOOP OUT ADJUST
FOLDER TRACK REMAIN
M
REPEAT
RELAY
SF
TEMPO
BPM
%
WIDE
±16
±10
±6
A.CUE
f g
h
j
i
Control unit
Browse section
About the [BROWSE] and [INFO] displays
[BROWSE] display
Use the rotary selector i to sort and display the loaded tracks with a
category or tree structure.
The display on the information display section differs according to
whether or not library information is recorded on the USB device.