Filter
Top Products
Using the timer
09
49
En
English
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see page 15).
TV CONTROL
123
456
7890
CLEAR
ENTER
SYSTEM SETUP
DVD SETUP
TOP MENU
DVD MENU
SHIFT
CHANNELINPUT VOLUME
SUBTITLE
VOLUME
ANGLE ZOOM
ADVANCED
AUTO
MIDNIGHT
QUIET/
BASS MODE
DVD
AUDIO
DVD/CD
TV
FM/AM LINE
L1/L2
SURROUND
PROGRAM
TEST TONE
REPEAT
CH LEVEL
RANDOM
TIMER
DIMMERDVD DISP
ROOM
SETUP
SYSTEM DISP
MUTE
TUNE +
ST+ST–
TUNE –
RETURN
FOLDER +FOLDER –
SOUND
MODE
ENTER
STANDBY/ON
4
/e
E/
1
¡
¢
8
7
3
1 Select the source you want played.
For example, press FM/AM (TUNER on the
front panel) to select the radio as your
source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
3 Set the volume.
4 Press TIMER (SHIFT+6).
5 Use the
/
buttons to select WAKE-
UP then press ENTER.
6 Use the
/
buttons to select TIMER
EDIT then press ENTER.
7 Set the switch-on time.
Use the
/
buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
8 Set the switch-off time.
Use the
/
buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
After pressing ENTER this last time, the
wake-up indicator lights, and the switch-on
and switch-off times are confirmed in the
display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!