Pioneer xv-htd320 DVD Player User Manual


 
41
En/Fr
7Playing Discs
English
Français
Lecture de disques
Introduction
Most of the functions covered in this chapter apply to
DVD discs, Video CDs and CDs, although the exact
operation of some varies slightly with the kind of disc
loaded.
When playing DVD discs, if the
or icon
appears on-screen when you try and use a particular
function, either the player or the disc doesn’t allow the
use of that function.
When playing Video CDs, some of the functions are
not available in PBC mode. You can switch PBC off by
starting playback using a number button to select a
track, rather than the 6 button.
Finding what you want on a disc
You can directly access any point on a disc using one of
the search modes. Use these search modes while a disc is
playing, or when it’s stopped—playback immediately
starts from the point specified.
1 Press SEARCH (SHIFT & 3) (remote only) to
choose between:
Title search (DVD only)
Chapter/Track search
Time search (DVD and Video CD only)
Off
2 Enter the title/chapter/track number or time
(minutes & seconds).
For example, for title 4, press 4.
For chapter/track 12, press 1 , 2.
For 45 minutes into the disc, press 4, 5, 0, 0.
3 Press 6 to start/restart playback.
Introduction
La plupart des fonctions décrites dans ce chapitre
font référence aux disques DVD, Video CD et CD, bien
que l’opération exacte de certains varie un peu avec le
type de disque chargé.
À la lecture de disques DVD, si l’icône
ou
apparaît à l’écran quand vous essayez d’utiliser une
fonction en particulier, soit le lecteur soit le disque ne
permet pas l’utilisation de cette fonction.
À la lecture de Video CD, certaines fonctions ne sont
pas valables dans le mode PBC. Vous pouvez désactiver
PBC en démarrant la lecture en utilisant une touche
numérotée pour sélectionner une piste, au lieu de la
touche 6.
Comment trouver ce que vous
souhaitez sur un disque
Vous pouvez accéder directement à n’importe quel
emplacement sur le disque en utilisant un des modes de
recherche. Utilisez ces modes de recherche pendant la
lecture d’un disque, ou pendant son arrêt—la lecture
démarre immédiatement à partir de l’emplacement
spécifié.
1 Appuyez sur SEARCH (SHIFT & 3) (seulement
télécommande) pour choisir entre :
Recherche de titre (seulement DVD)
Recherche de chapitre/piste
Recherche de temps (seulement DVD et Video CD)
Off (désactivé)
2 Entrez le numéro de titre/chapitre/piste ou le
temps (minutes et secondes).
Par exemple, pour le titre 4, appuyez sur 4.
Pour le chapitre/la piste 12, appuyez sur 1, 2.
Pour 45 minutes du disque, appuyez sur, 4, 5, 0, 0.
3 Appuyez sur 6 pour démarrer/redémarrer
la lecture.