Filter
Top Products
STEP 1 : CONNECT THE TV
This section of the setup asks questions about the components you
have and walks you through the steps needed to connect your TV
to a VCR, satellite receiver, and laserdisc player. If you used the
Connections Foldout to connect your TV, you can skip this step or
follow along for the sheer fun of it. If you haven't connected your TV
to any other components, answer the questions and follow the
on-screen instructions.
1. Follow the on-screen instructionsto connect your TV and other
components. When you complete these instructions, you are
automatically taken to the next step in the interactive setup routine.
STEP 2: SEARCH FOR CHANNELS
7:hesecond step automatically searches for all channels available
through your antenna or cable TV system. This is also called
"Automatic Channel Search."
1. Follow the on-screen instructionsto complete the automatic
channel search.
2. When the channel search is completed, press MENU to go to the
next step.
About the Remaining Steps
The remaining steps let you set the time and day, set up your speakers,
place channels in various lists, and label each channel. Some of these
steps, such as setting up your channel lists, can be time consuming.
Feel free to skip any or all of these steps and return to them later.
STEP THREE: SET THE TIME
1. Follow the on-screen instructions to set the time and day of
the week.
2. Point to Exitand press MENU to go to the next step.
A tip from Keith, the
Designing Engineer:
When you use the Lists and Labels
control panel, use the arrows to point
to any channel or field. Use the CHAN
buttons to point up or down to any
checkmarked channel in whichever
field you have selected.
i
19