Filter
Top Products
PROGRAMMING THE SIMPLE REMOTE
-[here are two methods to program the simple remote's VCR button:
CODE SEARCH and DIRECT ENTRY. The simple remote's TV button is
already programmed for your TV.
To program the VCR button using CODE SEARCH
1. Make sure the VCR isturned off unless it is a PROSCAN, RCA, or
GE product. If the VCR isa PROSCAN, GE, or RCA product, turn
it on.
2. Pressthe VCR button and the POWER button simultaneously.
3. Releasethe two buttons.
4. Pressthe POWER button repeatedly until the VCR turns ON.
5. Pressthe CHAN v button to verify the VCR operates correctly.
PressMENU to complete the process.
To program the VCR button using DIRECT ENTRY
1. Find the keypress combination for your VCR by locating your brand
of VCR in the VCR Codes table on the next page.
2. Note the code numbers that follow your brand of VCR.
3. Locate the code number in the Key Combination chart on
the next page.
4. Pressand hold the VCR button.
5. Enter the four keypresses shown in the Key Combination Chart.
28
Symbol
A
v
>
<
Simple Remote Button
CHAN UP
CHAN DOWN
VOL UP
VOL DOWN