Filter
Top Products
PIX+ OPERATION
There are four different PIX + modes: PIP (picture-in-picture), Split
Screen, POP (picture-outside-picture) and Channel Guide. You can
access all of these modes through the Screen menu.
PIP Mocle (picture-in-picture) Displays a second, smaller picture on
top of the main picture.
Split Screen Mode Divides the main picture into a left and a
Iright picture.
POP Mode (picture-outside-picture) Displays three small pictures to
the rightof the main picture.
Channel Guide Replaces the largepicture with 12 small pictures.
PIX + with remote control buttons
The following remote control buttons affect the PIX+ modes:
PIP Brings up the PIPwindow. Press PIPagain to remove the window.
SPLIT Brings up the Split Screen. PressSPLIT again to remove the
Split Screen.
POP Brings up the POP windows. PressPOP again to remove the
windows.
Guide Brings up 12 windows. PressGuide again to remove
the windows.
CH CTRL (Channel Control) Selects whether the main picture or a
PIX+ window isaffected by the CHAN buttons. Forinstance, pressPIP
to bring up the PIPwindow, then press CH CTRL. Now, when you
press the CHAN buttons,the channels will change in the PIPwindow,
not the main picture.
In PIPand Split Screen modes, CH CTRL switchesbetween the main
picture and the PIX+ window. In POP mode, CH CTRL switchesfrom
main picture to top window to middle window to bottom window and
back to main.
FREEZE Freezesthe video in the main picture or PIPwindow, if it is
displayed. To change which window iscurrently selected,
useCH CTRL.
SWAP In PIPor Split Screen mode, switches, or "swaps"' the video
display from the PIX + window to the main picture.
SIZE In PIP mode, selects the size of the PIPwindow. Choose from
five sizes.
52:
POP SPLIT CHCTRL
SWAP FREEZE
You can scanthrough channels in the
PIP window.When you find a channel
you like, press SWAP to display that
channel in the main picture, sending
the current channel to the PIP window.