Filter
Top Products
Set DVD*VCR Channel
Lets you select the channel that the TV tunes to when you press the
DVD-VCR button. The choices are the same as those listed under Set
VCR I Channel, except that the component is the second VCR or
laserdisc player, and the remote button being programmed is
DVD;VCR. For example:
Video 2 Input Choose this if your second VCR or laserdisc player is
connected to the Video 2 jacks on the back of the TV and you want
the TV to tune to Video 2 input when you press the DVD-VCR button.
This is a typical setting for a second VCR or laserdisc player.
PorentolControl
Eli
Set SAT-CABLE Channel
Lets you select the channel that the TV tunes to when you press the
SAT-CABLE button. Usually, SAT-CABLE can control either a satellite
receiver connected to the Video 1 input jacks or a cable box
connected to the Antenna A jack.
The choices are the same asthose listed under Set VCR 1 Channel,
and include Channel 2 Antenna A and Channel 2 Antenna B.Also, the
component is either a satellite receiver or a cable box, and the button
being programmed is SAT.CABLE. For example:
Video 1 Input Choose this if your satellite receiver isconnected to the
Video 1 jacks on the back ofthe TV and you want the TV to tune to
Video 1 input when you press the SAT-CABLE button. This isthe
typical settingfor a satellite.
The following is an example for a cable box:
Ch 3 Antenna A Choose this if your cable box is connected to the
Antenna A jack on the back of the TV and you want the TV to tune to
channel 3 when you press the SAT,CABLE button. This is a typical
setting for a cable box.
48