Filter
Top Products
The Initial Setup menu16
150
En
Additional information about the
TV system settings
About the input line system
This recorder is compatible with PAL,
SECAM, 3.58 NTSC and PAL-60 TV systems.
The Input Line System and Input Colour
System settings determine how the recorder
treats incoming video signals from an
external input.
Please note the following points when
changing the input line system:
• When the current input is a built-in tuner
channel preset, changing the input line
system will usually also affect the input
line system of the
AV2(INPUT 1/
DECODER)
input. However if the
AV2/L1
In
setting is set to
Decoder
, then the L2
input is affected instead.
• If, when the Input Line System setting is
changed, the screen goes blank (due to
incompatibility with your TV), you can
switch back by pressing and holding the
front panel
STOP
button then pressing
INPUT SELECT
(also front panel) while
the recorder is stopped.
• When you switch the Input Line System
setting the Copy List is erased. If you
switch the setting using the
STOP
button and
INPUT SELECT
buttons as
described above, there is no
confirmation, so please use with care.
• You can’t mix recordings of different TV
line systems on the same disc.
• When you change this setting, the
Input
Colour System
setting also changes
(see below).
AV. Link This Recorder
Only •
Signals received through the AV input when the
recorder is in standby are not passed through to the
AV output.
Pass Through
Signals received when in standby are passed though
to the output for connected devices. (Note that dur-
ing EPG data download, the EPG data is not passed
through.)
When set to
Pass Through
, make sure to set Power Save (page 137) to
Off
.
DivX VOD Registration Code
Use to display the recorder’s DivX registration code.
See
DivX video compatibility
on page 10 and
DivX®
VOD content
on page 11.
Set Preview
(HDD only)
Quick Preview •
When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
Normal
The thumbnail video plays from the beginning of the
title.
CI Information Next Screen
This option displays a menu of CI card functions.
Consult your service provider for more information
on the functions available.
Software Update Next Screen
The Software Update function can check for and
download updated system software for the digital
tuner. See
Using Software Update (Digital tuner)
on
page 152.
Setting
Options Explanation
DVR940HX_UK_EN.book 150 ページ ２００６年７月１２日 水曜日 午後４時５分