Filter
Top Products
Connecting up02
22
En
Connecting an external
decoder box (2)
If you only have a decoder, connect it to this
recorder and your TV as shown on this
page.
1
Using the setup on this page you can:
• Record scrambled channels received
using the recorder’s built-in analog TV
tuner.
Important
• Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
1 Connect your TV antenna to the
recorder and TV.
See
Connecting a TV antenna
on page 16 for
details.
2 Use a SCART cable (not supplied) to
connect the AV1(RGB)-TV AV connector
to a SCART AV connector on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect
the AV2(INPUT 1/DECODER) AV
connector to a SCART AV connector on
your decoder box.
This enables you to record scrambled TV
channels.
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the
AV2/L1 In
setting to
Decoder
from the Initial Setup menu (see
AV2/L1 In
on page 142).
• From the
Manual CH Setting
screen, set the
Decoder
setting for the scrambled channels to
On
(see
Manual
CH Setting
on page 140).
TV
Decoder
H
D
MI OUT
ANTENNA
IN
OUT
DIGITAL
AUDIO OUT
COAXIAL
ANTENNA
(DIGITAL)
IN
OUT
VIDEO
L
R
COMPONENT
VIDEO OUT
S-VIDEO
OUTPUT
INPUT3
IN
CONTROL
G-LINK
AV 1 (RGB) – TV
AV 2 (INPUT 1/DECODER)
AC IN
COMMON INTERFACE
AUDIO
P
BPR
Y
SCART AV
CONNECTOR
SCART AV
CONNECTOR
2
3
DVR940HX_UK_EN.book 22 ページ ２００６年７月１２日 水曜日 午後４時５分