Filter
Top Products
16
Installing Batteries
The remote control requires two AA batteries
(not supplied). For the longest operation and
best performance, we recommend alkaline bat-
teries (such as RadioShack Cat. No. 23-557).
Cautions:
• Use only fresh batteries of the required size
and type.
• Never leave dead batteries in the remote
control.
• Dispose of dead batteries promptly and
properly; do not bury or burn them.
1. Press down on the battery compartment
cover and slide it in the direction of the
arrow to remove it.
2. Insert fresh batteries into the compart-
ment, as indicated by the polarity symbols
(+ and –) marked inside.
3. Replace the cover.
Note:
If the remote control does not work or op-
erates poorly, replace both batteries.
Using the Remote Control
To use the remote control, aim the LED on the
front of the remote control toward the front of the
Model 28 and press the desired button(s).
HOME AUTO TWO WAY POWER
MODEL 28
16-420.fm Page 16 Tuesday, July 20, 1999 11:32 AM