Filter
Top Products
19
3. Repeatedly press
1
to select the desired
input signal (TV or CATV).
• If you connected an antenna (not cable)
to the Model 28 and want to receive up
to 68 VHF/UHF channels, or if you have
cable service and use a cable box, you
must select
TV
from the channel set up
menu.
• If you have cable service and do not use
a cable box, you must select
CATV
from
the channel set up menu.
4. Press
MENU
to exit the menu.
SETTING THE CLOCK
You must set the clock accurately for proper au-
tomatic timer recording. We suggest you use a
TV or radio station as your time source.
Follow these steps to set the clock.
1. Press
MENU
on the remote control to select
the main menu. The menu appears on the
TV screen.
2. Press
3
on the remote control to select
SETTING CLOCK
. The clock setting
screen appears, and
--
under
MONTH
flashes.
3. Use the number keys on the remote control
to enter the correct month, day, and year as
mm dd yyyy. For example, to set May 22,
1996, press
0
,
5
,
2
,
2
,
1
,
9
,
9
, and
6
.
Notes:
• Precede a single-digit number with a 0 —
for example,
01
,
02
, etc.
• If you enter an incorrect number, repeat-
edly press
ADD/DELETE
to move back or
SELECT
to move forward to the incorrect
number, then enter the correct number.
When you enter the month, day, and year,
the day of the week automatically appears
on the TV screen. For example, if you set
May 22, 1996,
WED
(Wednesday) appears
on the TV screen.
4. Use the number keys on the remote control
to enter the correct hour and minute as hh
mm. For example, to set 10:28, press
1
,
0
,
2
, and
8
.
5. Press
1
for an AM hour or
2
for a PM hour.
AM
or
PM
flashes.
6. Review the entered information.
• If it is not correct, repeatedly press
ADD/
DELETE
(to move backward) or
SELECT
(to move forward) to the incorrect infor-
mation, then enter the correct informa-
tion.
• If it is correct, press
MENU
. The screen
disappears.
When you press
MENU
, the seconds begin
counting from
00
and the current time
appears on the TV screen for about 5 sec-
onds, then disappears.
Note:
If the display shows abnormal infor-
mation or no information, unplug the power
cord (AC or DC) for about 1 minute. Then
plug it back in and repeat this procedure to
reset the clock.
MONTH DAY YEAR
- - / - - - - - -
HOUR MINUTE AM/PM
- - / - - - -
- SETTING CLOCK -
16-420.fm Page 19 Tuesday, July 20, 1999 11:32 AM