Filter
Top Products
34
3. Repeatedly press
CHANNEL
or
CHAN-
NEL
to set the start hour. Then press
VOLUME
. The start minute flashes.
Note:
If you set an earlier start hour than
the current hour, the Model 28 automati-
cally changes the today timer’s date to the
next day.
4. Repeatedly press
CHANNEL
or
CHAN-
NEL
to set the start minute. Then press
VOLUME
.
AM
or
PM
flashes.
5. Repeatedly press
CHANNEL
to set
AM
or
PM
. Then press
VOLUME
. The cursor
moves to the
END TIME
line.
6. Repeat Steps 3-5 to set the end hour and
minute. The current channel number flashes.
7. Repeatedly press
CHANNEL
or
CHAN-
NEL
to select the channel number.
Then press
VOLUME
. The current tape
speed flashes.
8. Repeatedly press
CHANNEL
or
CHAN-
NEL
to select the tape speed (
SP
,
LP
, or
SLP
).
9. Press
VOLUME
, then double-check all
the set information.
• If it is correct, press
MONITOR
.
• If an entry is not correct, repeatedly
press
VOLUME
to move to the incor-
rect entry, use the buttons on the front of
the Model 28 to enter the correct infor-
mation, then press
MONITOR
.
10. Press
POWER
to turn off the Model 28. The
TIMER REC indicator turns on to indicate
that the Model 28 is in the timer standby
mode.
Im
p
ortant:
• You can turn on and operate the Model 28
manually prior to the set start time, but the
Model 28 makes a today timer recording
only if the power is off at the set start time.
• Be sure the TIMER REC indicator turns on
when you turn off the Model 28. If it does
not, check your programming.
• If you set up the Model 28 to record a CATV
program through a cable box, be sure to
leave the cable box turned on and tuned to
the correct channel before the timer pro-
gram starts.
Checking/Changing the Today Timer
1. Press
POWER
to turn on the Model 28.
2. Press
MONITOR
. The today timer program
screen appears on the TV screen.
3. Double-check all the set information.
• If it is correct, press
MONITOR
.
• If an entry is not correct, repeatedly
press
VOLUME
to move to the incor-
rect entry, repeatedly press
CHANNEL
and
CHANNEL
to enter the correct
information, then press
MONITOR
.
4. Press
POWER
to turn off the Model 28. The
TIMER REC indicator turns on.
Clearing the Today Timer
1. Press
POWER
to turn on the Model 28.
2. Press
MONITOR
to display the today timer
program screen.
If the timer recording is already in progress,
press
MONITOR
then
STOP/EJECT
.
3. Press
VOLUME
. The Model 28 clears
the set today timer program.
4. Press
MONITOR
to exit the screen.
DATE 02/15 THU
START TIME 10:28 AM
END TIME 11:28 AM
CHANNEL 07
TAPE SPEED SP
- TODAY TIMER -
16-420.fm Page 34 Tuesday, July 20, 1999 11:32 AM