Filter
Top Products
21
3. Repeatedly press
SELECT
within 5 seconds
until the setting you want to adjust appears
on the TV screen.
Note:
If you do not press
SELECT
within 5
seconds, the displayed setting disappears.
Simply repeat Steps 1-2 to redisplay the
setting.
4. Within 5 seconds, repeatedly press
CH
or
CH
to adjust the displayed setting. A
bar graph appears on the TV screen to
show the current setting.
Notes:
• To quickly change the displayed setting,
press and hold down
CH
or
CH
.
• If you do not press
CH
or
CH
with-
in 5 seconds, the displayed setting dis-
appears. Repeat Steps 1-3 to redisplay
the setting.
5. Either wait 5 seconds or press
MENU
to exit
the screen.
USING MUTE
To temporarily turn off the Model 28’s sound,
press
MUTE
.
MUTE
and the volume level bar ap-
pear on the TV screen.
To restore the sound to the previous level, press
MUTE
again. To restore the sound and change
its level, press
VOL
or
VOL
.
USING CHANNEL RETURN
The Model 28’s channel return function lets you
quickly switch between channels you tuned by
using the remote control’s number buttons.
Repeatedly press
CHANNEL RETURN
to
switch from the channel
you are watching (or
AUX
) to the previous
channel you tuned (or
AUX
),
and vice versa.
VIEWING AN EXTERNAL
DEVICE
To view the signals from an external device con-
nected to the audio/video input jacks on the front
or back of the Model 28, do either of the following:
• Enter
00
using the remote control’s number
buttons
• Select one channel higher than the highest
programmed channel or one channel lower
than the lowest programmed channel.
AUX
appears on the TV screen.
CH
CH
CONTRAST
to decrease to increase
BRIGHT
to decrease to increase
COLOR
toward pale toward brilliant
TINT
toward purple toward green
SHARPNESS
toward soft toward clear
[-] [+]
CONTRAST
POWER
MUTE
EJECT
123
456
789
0 +100
CH
VOL
MONITOR
SLEEP
CHANNEL
RETURN
SELECT
ADD/
DELETE
MENU
C.RESET
C.MEMORY
REWIND PLAY F.FWD
RECORD STOP PAUSE/STILL
SPEED
16-420.fm Page 21 Tuesday, July 20, 1999 11:32 AM