Radio Shack 36 CRT Television User Manual


 
26
Note: You do not see the tape’s picture or hear
the tape’s sound while you search the tape.
1. Press
TIME
SEARCH
.
TIME
SEARCH
ap-
pears.
Note: You can also select
TIME
SEARCH
from the main menu.
2. Repeatedly press
PLAY/
s or
STOP/
t to
select the desired amount of time you want
to search. For example, to search 2 hours
and 50 minutes of recorded material, press
either button until
2:50
appears on the
screen.
3. To select the search direction, press
F.FWD/
or
REW/
. The Model 36 searches the
tape in the direction you specified and
stops when the running time on the tape is
the same as the time you specified in Step
2.
As the Model 36 searches, the search time,
displayed under
TIME
SEARCH
, counts up
or down.
4. To cancel a time search, press
STOP
.
USING AUTOMATIC REPEAT
PLAYBACK
Your Model 36 lets you automatically repeat
playback from the beginning to the end of a
tape, or from the beginning to a blank (unrecord-
ed) portion of a tape.
Notes:
REPEAT
PLAY
does not appear when
RENTAL
PLAY
is set to
ON
. See “Improv-
ing Playback of Older (Worn) Tapes”.
During automatic repeat playback, the
counter return function does not operate
(see “Using Counter Return” on Page 25).
TIME SEARCH
:
1. Press
MENU
. The main menu appears.
2. Press
PLAY/
s or
STOP/
t to select
USER’S
SET
UP
, then press
F.FWD/
. The user’s
set up menu appears.
3. Press
PLAY/
s or
STOP/
t to select
REPEAT
PLAY
.
4. Repeatedly press
REW/
or
F.FWD/
until
ALL
appears next to
REPEAT
PLAY
(to repeat playback from the beginning to
the end of the tape) or until
BLANK
appears (to repeat playback from the
beginning to a blank portion of at least 10
seconds in length).
5. Press
MENU
then
PLAY
to start automatic
repeat playback.
REPEAT
PLAY
appears.
6. To cancel automatic repeat playback,
repeat Steps 1–3, repeatedly press
REW/
or
F.FWD/
until
OFF
appears next to
REPEAT
PLAY
, then press
MENU
.
Notes:
If you select
ALL
or
BLANK
, the Model 36
is set to automatic repeat playback even
after you turn off power. To turn off repeat
play, you must select
OFF
in Step 4.
During automatic repeat playback, none of
the buttons on the Model 36 work except
POWER
and
STOP/EJECT
. Always remem-
ber to set
REPEAT
PLAY
to
OFF
when you
do not want to use automatic repeat play-
back.
IMPROVING PLAYBACK OF
OLDER (WORN) TAPES
You can set the Model 36 so it reduces the on-
screen noise you might see when you play back
older, partially demagnetized tapes (such as
tapes that are played often, like rental videos).
16-429.fm Page 26 Tuesday, July 20, 1999 3:50 PM