40
SERVICING YOUR MODEL 36
There are no user-serviceable parts inside your
Model 36. If you encounter a problem that you
cannot correct using this manual and its trouble-
shooting guide, take the Model 36 to your local
RadioShack store for assistance.
Cleaning the Video Heads
Although the Model 36’s automatic head clean-
ing system helps keep the video heads clean,
the video heads will require additional cleaning
after long use. Dirty video heads cause the play-
back picture to blur, even if the recorded signal
is clear. However, video head cleaning is a del-
icate operation that requires a trained techni-
cian. For more head cleaning information,
contact your local RadioShack store.
Have the video heads cleaned only when pic-
ture quality is affected.
STORING VIDEO CASSETTES
Unless you are making a timer recording, eject
and store the cassette when you finish using it.
This helps protect the cassette and the Model
36’s internal mechanisms from dust.
Place your video cassettes in their protective
boxes and store them in a cool, dry, dust-free
environment. Store the cassettes on end, not on
their sides. This prevents improper settling of
the cassette’s spools.
Note:
Tape can become wound too tightly
around the cassette’s spools after you play a
tape several times. This can cause the cassette
to improperly load and automatically eject when
you insert it. On most cassettes there is a brake-
release plunger on the bottom center of the cas-
sette. Use the tip of a pen or pencil to press the
plunger. This loosens the tape.
DEGAUSSING
Your Model 36 has an automatic degauss cir-
cuit. The circuit functions each time you turn the
power off. However, strong magnetism from
nearby appliances might affect the Model 36’s
picture. If this happens, move the Model 36
away from the appliance. If the Model 36’s pic-
ture is still affected, turn the power off for 30 min-
utes, then turn it back on. If the Model 36’s
picture is still affected, contact your local Ra-
dioShack store for assistance.
Brake-Release Plunger
16-429.fm Page 40 Tuesday, July 20, 1999 3:50 PM