Filter
Top Products
Chapter 3 29
Setup Menu
Auto Ch. Search (Auto Channel Search) Allows you to choose your
signal type and begin an Auto Channel Search.
Press the left or right arrow button to choose among the signal sources
below:
• Both
If you have connected both coaxial inputs on the back panel
of your TV, you can choose to do your Auto Channel Search on both
connections at one time by making this choice. Refer to page 5 for a
complete explanation of these connections.
• Digital
Choose if you are connected to the ANTENNA/CABLE
DIGITAL INPUT jack.
• Analog Choose if you are connected to the ANTENNA/CABLE
ANALOG INPUT jack.
Now use the down arrow button to choose a signal type.
• Digital Signal Type
Choose between Cable or Antenna if you are
connected to the ANTENNA/CABLE DIGITAL INPUT jack. If you chose
Both above, then you’ll need to choose a signal type for your digital
and analog connections.
• Analog Signal Type Choose between Cable or Antenna if you are
connected to the ANTENNA/CABLE ANALOG INPUT jack. If you chose
Both above, then you’ll need to choose a signal type for your digital
and analog connections.
After you have made the selections above, use the down arrow button
to highlight
Start.
• Start Press the right arrow button to start the search. Searches for
channels the TV is receiving and stores them in the channel list. Go to
page 11 (Auto Channel Search) for more information.
• Search percent Number displayed indicates how much of the
search has been completed on a digital signal.
• Analog Channel Shows the channel numbers as they are being
searched.
• Digital
Channel Shows the number of channels found as they are
being searched.
SETUP
Go Back
Auto Ch. Search < > ...
List & Labels ...
Closed Caption ...
Favorite CH ...
Language English...
Format 4:3
AUTO CHANNEL SEARCH
Go Back
Signal Source < > Digital...
Digital Signal Type Cable...
Start ...
Search percent 0
Digital Channel 0
AUTO CHANNEL SEARCH menu for
digital signals.
Using the TV’s Menu System