Filter
Top Products
Remote Control
Belore you use the remote control unit supplied with your
VCR, install the batteries (instructions below). Most of the
remote's buttons do the same things as the buttons with
the same names on the front of your VCR, and you can
use whichever one is more convenient at the moment.
The remote control is also used for setting the clock and
programming the timer.
Since the remote control operates the VCR by infrared
light, it is immune to electrical and sound interference.
However, you must aim the remote unit directly at the
VCR. There cannot be any obstructions between them.
Battery Installation
The batteries supplied with your remote control are
3acked separately. To install them in the hand unit:
1. Turn the hand unit over and remove the cover of the
battery compartment.
2. Insert the batteries so that their positive (+) ends
contact the positive terminals in the battery compart-
ment. These are marked (+) in the bottom of the
compartment.
3, Replace the cover.
Remote Unit _[_ -:_ I_
(Back View) ,,
i
i
' Battery
' I /'Compartment
_/Cover
Replace the batteries when your VCR tails to respond to
the remote control. Replacement batteries are widely
available. Use size "AA" 1.5 volt cells. Alkaline type bat-
teries are preferred. Good batteries should last a year or
more in normal service.
Avoid laying the remote control upside down or placing
things on top of it, This could depress the buttons and
discharge the batteries. If you are not going to use the
hand unit for a month or more, it is wise to remove the
batteries to avoid leakage.
ilLC411
0 PROGRAM: Used tor setting the clock and program-
ming the timer.
POWER: Same as the POWER button on the VCR,
PLAY: Same as the PLAYbutton on the VCR.
STOP: Same as the STOP button on the VCR.
F. ADV:(Frame Advance) Advances the picture from
frame to frame during stop-action viewing, This is
explained on page 17.
TV VCR: Same as the VCR button on the VCR.
Number buttons: Select any channel (whether or not
it is in the "Tuner Scan List") by pressing two but-
tons. (Press 0 and then 8 for channel 8). The number
buttons are also used for setting the c_ock and pro-
gramming the timer.
O CHANNEL • and T: Same as the CHANNEL buttons
on the VCR.
CLEAR: Used for setting the clock and programming
the timer.
PAUSE: Same as the PAUSE button on the VCR.
RECORD: Same as the RECORD button on the VCR,
(Press both PLAY and RECORD to begin recording.)
F. FWO/SEARCH I_1_: Same as the F. FORWARD/
SEARCH I_1_ button on the VCR.
(1_ SLOW: Used to begin Slow-Motion play. Press PLAY
to resume normal playing speed.
_) REWIND/SEARCH _i.i: Same as the REWIND/
SEARCH _i.i button on the VCR.
Note: Selected models of RCA color TV receivers and
monitor/receivers feature hand units that will also
remotely control your VCR See page 26 for details
13