Filter
Top Products
Quick Reference Guides
Recording With TV Off
Itisnotnecessaryto have yourTV on when yourecord.
O_RN ON VCR ,SELECT CHANNEL.
INSERT CASSETTE
PRESS BOTH PLAY AND RECORD.
STOP WHEN FINISHED
SELECT SPEED
TO TUNER,
Normal TV Viewing
Follow the two steps in the drawing for normal TV view-
ing. TO view UHF stations, just tune your TV to the chan-
nel, regardless of what the VCR is doing, If you have a TV
Monitor/Receiver and the VCR's audio and video outputs
are connected to it, switch the TV to "Tuner Input" and
select the channel you want, regardless of what the VCR
is doing.
TURN POWER OFF
Q [[] [L
OR TURN VCR LIGHT OFF
O OPERATE TV AS USUAL.
Recording and Viewing the Same Program
O TURN ON TV,
O TUNE TV TO VCR CHANNEL(3 OR 4),
TURN ON VCR. )INSERT CASSETTE.
SELECT CHANNEL.
PRESS BOTH PLAY AND RECORD.
STOP WHEN FINISHED.
LIGHT ON
TUNER. PRESS PAUSE TO INTERRUPT RECORDING
PRESS IT AGAIN TO RESUME
Note: If you want to view another VHF or Cable-TV than- TV If you want to view a UHF channel after you start re-
nel after you start recording, press the VCR/TV switch so cording, simply tune the TV to the channel.
the light above it goes off. Then select the channel on the
18