Filter
Top Products
4
Assembling the Antenna
Start by unfolding the VHF elements on the back assembly until the
elements are perpendicular to the boom (Figure 1). You should hear the
elements click into place.
VHF Elements
Before
Boom
Boom
After
Figure 1
Boom
Fold out Elements
Before
Fol
Ele
m
m
Boom
Phasing
Lines
After
Unfolded
Elements
Figure 2
Open End
of Boom
Screw
Removal
Site
Figure 3
Unfold the six UHF elements on the front assembly until they are
perpendicular to the boom. See Figure 2. You should hear the pieces click
into place. Pull the two phasing lines away from the boom.
On the back assembly, remove the nut and screw from the plastic block
nearest to the open end of the boom and to the mast clamp (Figure 3).