Filter
Top Products
6
Reflector Brackets
Figure 7
Figure 8
Screws
Figure 9
Insert the open end of one corner refl ector in-between the top of the
refl ector brackets (Figure 7). (Elements should be on top.) Align the holes
in the brackets with the hole in the corner refl ector. Insert a large screw
through the holes. Thread a small fl ange nut on the screw.
Next, insert the open end of the second corner refl ector in-between the
bottom of the refl ector brackets (Figure 8). (Elements should be on bottom.)
Align the holes in the brackets with the hole in the corner refl ector. Insert a
large screw through the holes. Thread a small fl ange nut on the screw.
Tighten the two fl ange nuts. See Figure 9.