Filter
Top Products
5
ENGLISH
Before
Corner Reflector
After
Figure 6
Top View
Phasing
Lines
Side View
Reflector Bracket
Phasing
Lines
Rivet
Figure 5
Crimped End
Screw
Insertion
Site
Front Assembly Back Assembly
Mast
Clamp
Figure 4
Unfold the elements on the two corner refl ectors as in Figure 6. You should
hear the pieces click into place.
Then, slip the phasing lines onto the threaded rivets near the refl ector
brackets. Add a washer onto each rivet. Thread a small nut onto each rivet.
See Figure 5.
Slide the crimped end of the front assembly boom into the open end of the
back assembly boom (Figure 4). Re-insert the screw into the plastic block
closest to the mast clamp, and secure with the fl ange nut.