Filter
Top Products
Chapter 5 61
Using the Menu System
PARENTAL SETUP
CODE: USA
1 2 3 4 5 6 7 8 OFF
PARENTAL SETUP
CODE: USA
1 2 3 4 5 6 7 8 OFF
PASSWORD: ????
PARENTAL SETUP
CODE: USA
1 2 3 4 5 6 7 8 OFF
PASSWORD: 1234
PARENTAL SETUP
CODE: USA
1 2 3 4 5 6 7 8 OFF
SELECT LEVEL
Set Parental Limits
The PARENTAL SETUP menu lets you set viewing limits according to a movie’s rating or
contents. Some discs are equipped with a rating feature that rates the disc according to the
content. Some discs let you edit out scenes and replace them with scenes suitable for children.
You can also set the locking feature so any discs beyond the rating you select cannot be played.
1. Press the DVD SETUP button to display the setup menu.
2. Press the up or down arrow button to highlight the (PARENTAL SETUP
icon), and press OK to display the PASSWORD screen.
3. Use the number buttons (0-9) to enter a 4-digit password, and press OK.
The password verification screen appears. Enter your password again, and
press OK.
Important Note: Be sure to remember your password. The next time you try to
access this menu, you will have to enter the same password.
If you forget your password, you can erase the current one by pressing the STOP
button on the remote four times.
4. The ratings for the USA are listed. Press the up or down arrow button to
highlight the highest level you want DVDs played.
• Select 1 (G rating) for the most restricted viewing.
• Select 3 for PG rating.
• Select 4 for PG13 rating.
• Select 6 for R rating.
• Select 7 for NC-17 rating.
• Select 8 for adult viewing.
5. Press the OK button on the remote to set the viewing level.
Notes: If this feature is set to OFF, the selected rating does not apply. All discs can
be viewed.
The discs must be encoded with the rating feature.
Some discs let you temporarily change the level setting to view original scenes, and
some discs have a set level and cannot be modified.