Filter
Top Products
Chapter 6 71
Other Information
PAUSE Press once to pause playback. Press again to advance one frame. Press PLAY to return to playback.
PLAY Press once to begin playback.
PROGRAM EVENT Indicator Lights when a timer program has been set and a cassette with the safety tab is in the
TV/VCR. Also flashes when a timer recording has been set and the TV/VCR is turned off with no cassette inserted, a
cassette without the safety tab has been inserted, or there has been a power interruption.
RECORD and RECORD Indicator Press to start TV/VCR recording. The RECORD indicator lights during recording.
REW (Rewind) Rewinds the tape when the TV/VCR is stopped. Searches the picture in reverse during playback.
STOP/EJECT Stops normal functions such as record, play, rewind, fast-forward, or pause. Press when a tape is
stopped to eject the cassette.
TIMER Indicator Lights when the on or sleep timer has been set.
VCR Indicator Lights when the TV/VCR/DVD is in the VCR playback.
VIDEO
LINE IN
ANT/CABLE
75
LINE
IN 1
OUT
AUDIO
Back Panel Jacks
ANT/CABLE Jack Receives a signal from an antenna or cable system
when the TV/VCR/DVD is attached with an RF cable.
LINE IN/IN 1 AUDIO (L and R) and VIDEO Jacks Receives signals
from another component, such as another VCR or camcorder, when the
component is connected to these jacks. To see the content coming from
the component connected to these jacks, press the INPUT button on the
remote until LINE 1 appears on the screen.
LINE OUT AUDIO (L and R) and VIDEO Jacks Sends signals from the
TV/VCR/DVD to another component, like a stereo amplifier or speakers
when the other component is connected to these jacks. These jacks are
shared between the DVD player output and VCR player output. The
output is from the DVD player when the TV/VCR/DVD is in the DVD
mode. The output is from the VCR player when the TV/VCR/DVD is in
the VCR mode.
OPTICAL DIGITAL OUT and COAXIAL DIGITAL OUT Use a digital
optical cable (not provided) or a shielded coaxial cable (not provided) to
connect your TV/VCR/DVD player to a compatible Dolby Digital or DTS
receiver or decoder. You must set the digital output to digital
(instructions on page 62). Digital output is not available during VCR
playback.