Filter
Top Products
Graphics contained within this publication are for representation only.
34
Chapter 4: Playing Discs
Using Different Menus
Each disc is programmed with different features. There are three separate types of menus that you can
use to access features:
• The Disc menu – The Disc menu is part of each disc and is separate from the DVD recorder’s
menu. The contents of each Disc menu vary according to how the disc was authored and what
features are included.
To make the Disc menu appear, press the MENU button while the disc is playing.
• The DVD recorder’s Info Display – The Info Display appears as icons across the top of the
screen when a disc is playing. It can only be accessed while you are playing a disc. It’s turned on
and off with the INFO button on the remote. The Info Display icons change based on the type of
disc you’re playing. Go to page 35 for more information.
• The DVD recorder menu – If you’re playing a disc, press STOP (the DVD recorder’s menu
appears automatically).
Remember: A feature will only work if the disc was programmed with that feature. For
example, if you choose subtitles on the Info Display, the subtitles will only appear if the disc
was created with subtitles. If a menu or icon is “grayed out” it means that item (or feature)
isn’t available.
Search Options
Picture Scan
To search a disc during playback, use the FORWARD or REVERSE button. Each time you press
FORWARD or REVERSE, your DVD recorder scans the disc faster until you reach the fastest scan
speed. To resume normal playback, press PLAY.
Note: Many DVD titles are programmed to prohibit skipping of warnings or credits so that you
can’t fast forward through them.
Freeze Frame and Frame Advance
While a disc is playing, press PAUSE to freeze the picture. To advance one frame at a time, press PAUSE
again (the on-screen icon changes from PAUSE to FRAME). Each time you press the FORWARD or
REVERSE button, the picture goes to the next (or previous) frame. To resume normal playback, press
PLAY.
Slow Motion (in Freeze Frame Mode) – DVD discs only
While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each time you press REVERSE or
FORWARD the slow motion will get a little faster until you reach the fastest slow motion speed). To
resume normal playback, press PLAY.
Time Search – DVD and VCD discs only
Make sure the Time Display (top left side of the Info Display) is highlighted, and then use the number
buttons to enter a specifi c time on the disc that is playing. Go to page 36 for more information about
the Time Display.
Quick Fast Forward and Quick Reverse – DVD and Audio CD only
While you’re playing a disc, press the AGAIN button on the remote (the disc automatically repeats the
last 10 seconds of the movie).
Similarly, press the ADVANCE button to go forward approximately 30 seconds.
Playback options
Many of your DVD recorder’s playback features are accessed through the Info Display (described on
pages 35 through 39). Additionally, with some discs you can use the Zoom Feature to see details of an
image.
Zoom
1. While you’re playing a disc, press ZOOM (the player zooms in on the image). Each time you press
ZOOM, the picture is magnifi ed even more (until you get to the maximum zoom level).
2. To see other parts of the picture when you’ve zoomed in on the image, press the up, down, left,
and/or right arrow buttons to go in corresponding directions.
Watch TV
Disc
Disc Library
Timers
Setup
Live - Ch 2
No Disc
1 Library Disc(s)
10:49 am Thu 17-Mar 2003
To watch TV, press OK.
ON
•
OFF
MUTE
RETURN
GO•BACK
INPUT
ANTENNA
123
4
5
6
78
0
9
VOL
CH
SAT•CABLE TV
DVD
MENU
CLEAR
INFO
ANGLE
GUIDE
OPEN•CLOSE
ZOOM
REVERSE PLAY FORWARD
PAUSESTOPRECORD
AGAIN ADVANCELIVE
TIMER
ZOOM
button
REVERSE
button
FORWARD
button
PAUSE
button
ADVANCE
button
AGAIN
button