Filter
Top Products
Graphics contained within this publication are for representation only.
20
Explanation of Buttons
You can use this remote to operate the DVD recorder, and to access the features available. The
remote is also designed to operate most RCA, GE, and Proscan components (TVs and satellite
receivers). If you have another brand, you can program the remote control to operate those
components (go to page 22 for instructions).
The descriptions that follow describe how each button works when operating the DVD recorder.
Many buttons will perform different functions depending upon the type of disc and menu functions of
the disc.
Indicator light Used to indicate status of remote control when programming it to operate other
components. Also, indicates when batteries are low by flickering when you press a button on the
remote.
0-9 (Number buttons) Use the number buttons to input information such as chapter numbers,
track numbers, to make selections on some menu screens, and/or to change channels.
Arrow buttons (up, down, left, right) Use the arrow buttons to highlight options that appear
on the screen (the arrow buttons move the highlight in the corresponding directions — up arrow
moves the highlight up; left arrow moves the highlight left, etc.).
ADVANCE When playing a disc, moves forward approximately 30 seconds. Not applicable for
VCDs or mp3 files.
AGAIN Accesses the Scene Again™ feature—replays the last several seconds (approximately 10)
of the DVD disc you’re playing. Not applicable for VCDs or mp3 files.
ANGLE Accesses various camera angles that might have been added to a pre-recorded disc when
it was created. Not available on all discs.
ANTENNA In DVD recorder mode, switches between displaying the picture from the DVD
recorder or the TV. Allows you to watch pne program while you record another. In SAT•CABLE
mode, functions as a Satellite/Receiver button for RCA satellite receivers.
CH + Advances to the next chapter or track when you’re playing discs. Goes to the next channel
in the channel list when watching TV.
CH – When playing a disc, goes to the beginning of the current chapter or track, unless you’re
within the first minute of a chapter or the first 15 seconds of a track—then you’ll skip to the
beginning of the preceding chapter or track.
When watching TV, goes to the previous channel in the channels list.
CLEAR Removes on-screen menus and displays.
DVD Turns on the DVD recorder and puts the remote in DVD mode so it operates the DVD
recorder.
FORWARD Searches forward through the disc.
GO BACK Returns you to the previous menu. When watching TV, goes back to the previous
channel.
INFO Displays the on-screen Info Display (for details about the Info Display, go to page 35.)
Chapter 2: The Remote Control
ON
•
OFF
MUTE
RETURN
GO•BACK
INPUT
ANTENNA
123
4
5
6
78
0
9
VOL
CH
SAT•CABLE TV
DVD
MENU
CLEAR
INFO
ANGLE
GUIDE
OPEN•CLOSE
ZOOM
REVERSE PLAY FORWARD
PAUSESTOPRECORD
AGAIN ADVANCELIVE
TIMER
The Universal Remote Control that came with your DVD
recorder operates most RCA, GE, and Proscan branded
components.
Additionally, the remote is capable of being
programmed to operate many other brands and
models of TVs, satellite receivers, or
cable boxes.
Indicator light
INPUT In DVD recorder mode, accesses the Input Jacks on the recorder (RF ANTENNA/CABLE INPUT, INPUT 1, and INPUT 2 on the front of the
DVD recorder).
LIVE When main menu is on the screen, provides quick access to watch TV.
MENU When you’re not playing a disc, accesses the DVD recorder’s menu. When you’re playing a disc, accesses the disc’s menu, if one is available.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OPEN•CLOSE Opens and closes the disc tray.
OK When a menu is on the screen, selects the highlighted item.
ON•OFF Turns the DVD recorder on and off. Also turns off compatible components.
PAUSE Pauses disc play or recording.
PLAY Begins disc play.
RECORD Records programming.
REVERSE Searches backward through the disc.
SAT•CABLE Puts the remote in Satellite or Cable mode in order for the remote to operate a satellite receiver or cable box. This remote is capable
of being programmed to operate most brands of satellite receivers and cable boxes. This remote is already programmed to operate RCA, GE, and
Proscan brand satellite receivers.
STOP Stops playback or recording.
TIMER/GUIDE Accesses the list of Timer Recordings (the Timer List screen).
TV Puts the remote in TV mode in order for it to operate your TV. This remote is already programmed to operate RCA, GE, and Proscan brand TVs.
This remote is capable of being programmed to operate many brands of TVs.
VOL +/- If your remote is capable of operating your TV, increases and decreases the volume level.
ZOOM Enlarges the image on the screen so you can zoom in on details. To pan and scan after you’ve zoomed in on an image, use the arrow buttons.
The Zoom feature isn’t available on all discs. Typically, it works with DVD discs and CDs with JPEG files.