RCA HD61LPW62 Flat Panel Television User Manual


 
Connections & Setup
Chapter 1 23
Tip
Inputs 2 and 3 can be used as either component
video (Y PB PR ) inputs, composite video
(Y/Video) inputs, or S-Video inputs.
COMPOSITE INPUT
INPUT 1
VIDEO
L
R
Y/VIDEO
P
B
PR
L
R
S-VIDEO
CABLE INPUT
ANTENNA INPUT
VIDEO/AUDIO INPUTS
INPUT 1 COMPOSITE INPUT Connect an NTSC (analog) device. These jacks
are used for most audio/video connections between devices. The audio/video
jacks are often color coded (yellow for video, red for right audio, and white for
left audio).
R Audio provides right audio connection and connector is usually red.
L Audio provides left audio connection and connector is usually white.
V (Video) provides composite video connection and connector is usually
yellow.
INPUT 2 COMPONENT/COMPOSITE INPUT Provides connection to a
second NTSC (analog) video device with either composite or component
outputs such as a VCR or DVD player.
R Audio provides right audio connection and connector is usually red.
L Audio provides left audio connection and connector is usually white.
Y/Video P
B
P
R
Unlike a single video input, component (Y P
B
P
R
) video
maintains the video signal as three separate parts through these three jacks.
To ensure maximum picture quality, use three video-grade cables for the
Y P
B
P
R
connections. Accepts 480i, 480p, 720p, and 1080i signals. If you’re
connecting to a device with a Video jack instead, you can still use the
Y/Video jack.
Note: Also, remember to connect the left and right audio cables because the
Y, Pb, Pr cables carry only the picture signal, not the sound.
S-VIDEO Lets you connect an S-Video cable for better picture quality to a
device with S-Video capability, such as a VCR or DVD player. When using
S-Video, make sure to connect the two audio cables as well as the
S-Video connector.
The S-Video jack provides better picture quality than the composite
video jacks because the color (chrominance, also called chroma) part of
the signal is separated from the black and white (luminance) part of the
picture.
INPUT 3 COMPONENT/COMPOSITE INPUT Provides connection to a
second optional video device, such as a DVD player or satellite receiver. The
jacks are the same as described above for INPUT 2.
CABLE INPUT Used to connect a coaxial cable to receive the signal from
cable or a cable box.
ANTENNA INPUT Used to connect a coaxial cable to receive the signal from
an off-air antenna.