RCA P52939 Projection Television User Manual


 
Setup and Connections
5
The Basic Connection
The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
Cables
You will use the following cable to make your
connection:
Coaxial Cables: These cables carry both the audio and video signal to
the TV from an antenna, cable, or cable box. In this connection, a second
Coaxial Cable carries the signal through the VCR to the TV.
VCR 1
TV
RL
G-LINK
P
R
P
B
Y
AUDIO
VIDEO
OUT
IN FROM ANT
OUT TO TV
CH3
CH4
FROM CABLE, CABLE BOX, OR ANTENNA
Once you have completed this connection go to Step 3:
Connect the G-LINK Cable on page 9.
How to View the VCR
To watch the VCR in this connection tune TV to
Channel 3 or 4.
Later, in the Interactive Setup section you will
program the TV to automatically tune to Channel 3 or
4 when you turn on the VCR.