Filter
Top Products
46
Features and menus
Grid Guide
The Grid Guide appears each time you enter the GUIDE Plus+ Gold menu
system. It displays the current programming for each channel. The live
program is displayed in the video window.
• Use the up and down arrows to browse channel listings and CH ^/v
to page through listings. Use the right and left arrows to browse
future program listings.
• To tune to a channel, highlight the program you want to view in the
channel listing and press OK. Press CLEAR to exit the GUIDE Plus+
system and return to the original channel. Press GUIDE to exit the
GUIDE Plus+ Gold System and tune to the channel in the view
window.
Grid Guide Action Buttons
Action buttons will change according to where you are in the GUIDE
Plus+ Gold System. Be sure to look at the action bar before pressing the
command numbers.
When highlighting the Channel listings, the following Action buttons
are available on the bar:
• Watch Press 1 on the remote to place a timer in the Schedule for
the TV to turn on and tune to the program highlighted in the
Channel listing. When the TV turns on, the GUIDE Plus+ Gold System
will automatically appear with the scheduled program highlighted
and tuned in the View window.
• Go To Press 2 on the remote to bring up the direct dial box and
enter the number of the channel you want. This will highlight the
channel and current program in the channel listing of the Grid
Guide. Press OK to tune to the highlighted channel. If the view
window is unlocked, you can press GUIDE to tune to the channel.
• Record Press 3 on the remote to place a timer in the Schedule for
the VCR to record the program highlighted in the Channel listing. If
you have a cable box, changing channels on the TV will not cause
the cable box channel to change while recording.
The Program information window will display a confirmation when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap, you will receive a timer conflict message. The GUIDE Plus+ Gold
System will not schedule a conflicting timer, therefore you must choose
between the two programs.
When highlighting the Channel names (the left column on the Channel
listing), the following Action buttons are available on the bar:
GUIDE Plus+ Gold screens illustrated in
this book are representations of what
you are likely to see. Not all channels,
programs, and GUIDE Plus+ Gold
information depicted will be available in
your area.
New features and options can be
downloaded to the GUIDE Plus+ Gold
System, so these too are subject to
change.
Grid Guide
Action Buttons
Grid Guide
Menu
Selection
Action Button
command
numbers
TV
ON OFF
AUX
DVD
SAT•CABLE
SOUND
GO BACK
C
H
+
C
H
-
V
O
L
V
O
L
SKIPMUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
WHO•INPUT
VCR1
VCR2
Timer Recording
Make sure that the G-LINK cable is
connected to the TV and VCR and all steps
in the Guide Plus+ setup routine have been
completed successfully.