RCA 32F650T Satellite TV System User Manual


 
Chapter 1 7
Graphics contained within this publication are for representation only.
Connections & Setup
Plug in the TV
Plug the end of the power cord into a grounded wall outlet.
Insert the plug completely into the outlet.
Put batteries in the remote
Remove the battery compartment cover from the back of
the remote by pushing down on and sliding off the cover.
Insert 2 fresh “AA” batteries. Make sure the polarities (+
and -) are aligned correctly.
Replace the cover.
How to Use the Remote Control to Complete
the Initial Setup
The technical term is “Navigation”– how you move through
the on-screen menus. The method is the same throughout
the menu screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the
remote to highlight one of the items listed on the screen. Use
the up or down arrow button to move up or down. Use the
right or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter, or a different color).
Turn on the TV
Press TV on the remote, or press POWER on the TV’s front
panel.
Note: Pressing the TV button not only turns on the TV, but puts the
remote into TV mode. “TV mode” means that the buttons on the
remote control operate the TV’s functions.
Complete the Initial Setup
The menu system in your TV allows the TV’s features to work
properly. The first time you turn on your TV, the SETUP screen
appears with Language highlighted. The default language is
English. To choose another language, press the right arrow
button.
ON-OFF
TV
DVD VCR
SAT•CAB
AUX AUDIO
CLEAR
CC
INFO
MENU
OK
PRESETS SKIP
GUIDE
OK button
Arrows
Go Back
Auto Ch. Search
Closed Caption
Auto Tuning
Language
SETUP
. . .
. . .
. . .
English . . .
1616302A.01_C&S 4/15/04, 10:17 PM7